Laminar Scots pine wood with autoclave impregnation in class RAL 3 according to the
DIN 68800/3 standards. Wood painted with water-impregnated varnishes. Painted Aisi 304 stainless steel brackets and supports. Stainless steel bolts and screws.
Double-beam load-bearing structure, 150 or 200 x 60 mm, leaning on front 90 x 160 mm beam supported by posts. Fabric pitch awning supported by 43 x 65 mm windbreak support bar profile and by 85 x 65 mm load-bearing end, and slides on 46 x 85 mm lateral guides. Windbreak support bar, end and guides are made of painted aluminum. Transmission system on lateral guides with high-resistance timing belt, rotating on ball bearings. Manual or automated movement system.
Produced with: front gutter with downspout incorporated in the post and water drainage through the foot secured to the ground.
For projections greater than 600 cm, support beam (section 9 x 6 cm) positioned at about half the projection.
Possibility to customize beam ends.
Dimensions
| (L) Width | from 250 to 550 cm (1 module) up to 900 cm (2 modules) up to 1200 cm (3 modules) |
| (S) Projection | Projection from 200 to 700 cm |
| (H) Height | 230 cm under the beam |
